669 views admin 2020-06-23
1. Check and confirm that the serial cable used to connect to the controller is a straight-through cable, not a crossover cable.
2. Make sure that the control system hardware has been powered on correctly. If it is not powered on, it must be powered on within the first time.
3. Check and confirm that the serial port connection cable of the electronic display is intact and there is no looseness or detachment at both ends.
4. Check whether the jumper cap in the screen is loose or falling off. If not, please make sure that the jumper cap is in the correct direction.
5. Compare with the control software of the electronic screen and choose the control card to choose the correct product model, the correct transmission method and serial port number, the correct serial transmission rate, and set the control system hardware on the control chart provided in the software. Address.
If it still fails to load after passing the above checks, it is recommended to measure with a multimeter at this time. Check whether the serial port of the connected computer or control system hardware of the LED electronic display is damaged, and then confirm whether it should be sent to the manufacturer for repair, so as to solve the problem of not loading.
More technical articles: Technology | What is the effect of LED display under high temperature working conditionSunrise LED Display factory
At present, the naked eye 3D large screen market is hot, and 3D technology is also known as 3D di...
Sunrise’s p2.604 curved LED display lights up under the Eiffel Tower Sunri...
Concert activities are popular in the United States, and sunrise’s products have been wide...
Sunrise 264 square meters Galaxy 3115 series mesh led facade in Armenia Sun...
Doris, as a new salesman, won three orders in two months. It’s great. Jack, the bu...
640w and 800W full spectrum led grow light It can be folded for convenient transportatio...
The latest project, Saudi Arabia LED MESH FACADE. Ultra-high brightness, ultra-light LED display ...